Straight Grinder, Burrs and Accessories

Straight Grinder, Burrs and Accessories

In this category you will find straight grinder devices of the brands Makita and Milwaukee, as well as a wide range of different cutters, such as carbide cutters, drill cutters, aluminum and turbo cutters, which you need for milling lock cylinders. Especially for high-quality lock cylinders, electronic lock cylinders or lock cylinders with very good pull protection, milling lock cylinders is the only way to open them. Therefore, straight grinder also belong in the basic locksmith equipment and in a locking tool set for fire departments.

All cutters for milling out lock cylinders are needed for different lock cylinder materials. We recommend the aluminum cutters especially for soft metals. The carbide cutters, on the other hand, are suitable for brass and steel and are therefore the ideal cutters for milling out lock cylinders. Therefore, the carbide cutters are mainly used by locksmiths and fire departments to mill out lock cylinders.

If you need cheap and high quality carbide cutters for milling out lock cylinders, we can recommend our ZIEH-FIX® carbide cutters. The ZIEH-FIX® carbide cutters were specially developed by us for milling out lock cylinders.

Filter
Set Descending Direction

31 items

Page
per page
  1. Add to Compare
    ZIEH-FIX® Carbide cutter, Ø3 mm, 60 mm length
    1723-60
    €18.74 €15.75
  2. Add to Compare
    ZIEH-FIX® carbide carbon steel drill bit - 6 mm Ø x 70mm
    1731-70
    €26.78 €22.50
  3. Add to Compare
    Burr, 6.0 mm Diameter, special for locksmith
    17xx
    Rating:
    97%

    Starting at €37.14 €31.21

  4. Add to Compare
    Beschichteter Hartmetall Fräser - verschiedene Längen
    171X-B
    As low as €50.90 €42.77
  5. Add to Compare
    ZIEH-FIX® Carbide cutter, Ø6 mm different lengths
    1722
    Rating:
    100%

    Starting at €27.36 €22.99

  6. Add to Compare
    Magi-Burrs® - THE Burr for lock opening
    1726
    Rating:
    95%
    As low as €23.80 €20.00
  7. Add to Compare
    Magi-Burrs® - Master Kit
    1726-SET
    Rating:
    100%
    €193.67 €162.75
  8. Add to Compare
    Burr, 4.3 mm dia., 60 mm Length
    1709
    €37.19 €31.25
  9. Add to Compare
    Coated carbide cutter, Ø 4.3, 60 mm length
    1709-B
    €47.74 €40.12
  10. Add to Compare
    ZIEH-FIX® Carbide cutter "Viper", Ø4 mm different lengths
    1724

    Starting at €31.29 €26.29

  11. Add to Compare
    Burr (HSS) for Aluminium, 6.0 mm dia., 50 mm Length - Recommendated for soft material
    1720-A
    €22.78 €19.14
  12. Add to Compare
    Burr (HSS) for Aluminium, 6.0 mm dia., 50 mm Length - Recommendated for soft material
    1720-B
    €40.15 €33.74
Filter
Set Descending Direction

31 items

Page
per page