G-8-22 - Evasion and Escape Set GS

G-8-22 - Evasion and Escape Set GS

The single wave G-8 acts like a rake.

You also asked for deeper picking capabilies: here you go with the G-22 hook 4.

The approximate 1.25 plus inches length prior to the twist allows for picking most, if not all locks.

The uniform tapering from shaft to tip, maximizes strength and eliminates stress concentrations that can cause picks to snap. This offering is similar to the SERE(tm) style. We call ours: E&E (Evasion and Escape.)

To insure durability, these picks are made from Petersons famous "Government Steel." They use their kinetic tumbling system to gain an ultra smooth finish and excellent pick operation in the keyway. One issue with existing picks of this nature, is the operational length tends to address 5 pins or less locks. One of our advances is to extend the reach so that locks having 7 pins or maybe more, can be manipulated.

An additional issue in Europe is the clutch action inherent within many of their locks. If the clutch is not pushed to the rear (normally performed by the key) you will find that you end up picking the plug, but the lock will not open. In this kit, you will receive a G8-GSP and a G22-GSP, plus a long turning tool so you can depress the clutch as you pick.