ZIEH-FIX® "Bell" puller

• Extraction Tool of the first generation
• Modified in our company
• Now produced in a new design

Professional tool for the plug-pulling and destruction of profile, round and oval cylinder locks

This special tool, developed for locksmiths and governmental agencies, allows the easy and efficient removal of any type of (profile, round and oval) cylinder locks. The “BELL” allows the fast opening of doors without damaging the door or the door guard. Using the plug extractor plates for the pulling of plugs, it is also possible to only remove the plug itself from the cylinder, allowing quick and easy access to the locking mechanism.
The “BELL” often is the only effective manner of a time-saving emergency-opening, especially in the case of multiple-bolt locks and half cylinders (cylinders that only contain 1 plug and can only be opened from one side of the door), as commonly used for example in glass-doors, garage-doors, alarm systems and shades. As the device works with a single and centrally oriented pulling-mechanism there is no sideways force during the actual pulling. This avoids the tilting or breaking of the special pull-screws.

Advice for user

Art. 1005  ZIEH-FIX® Glocke

The threaded rod and the bearing of the ZIEH-FIX® bell must be greased at regular intervals.

With pressure against the inner part (pull piece) of the bell, the nut lifts off from the thrust bearing.

Brush the now visible part of the threaded rod with a multi-purpose grease.

Alternatively, a corresponding spray grease can be used.

By unscrewing or loosening the nut, the upper pressure plate of the thrust bearing can be lifted.

Brush or spray the inside of the pressure plate with grease

!! The use of commercially available spray oil is not sufficient to lubricate the threads, !!